Basic Info.
Number of Cylinder
Monocular
Stereoscopic Effect
Without Stereoscopic Effect
Principle of Optics
Phase Contrast Microscope
Display
3.5" TFT Color LCD
Image Resolution
640 X 480
Video in X 1
System Format:NTSC/PAL
Power out
DC Power out X1 (Support CCD Camera of Power Sourc
Status Indicator
2 LED(Power Ind=Green/Charging Ind=Red)
Power Source
Built-in Rechargeable Lithium Battery: 3.7V 2000mA
Dimension
External Power: DC 5V 1.0A Adapter
180mm(L) X 98mm(W) X 30mm
Weight:250g
Product Description
AYT-02 Fiber Video Microscope can offer 600 magnification for the fibers of 125um(diameter), single-mode and multi-mode are all included. ( based on the magnification of the 9 inch display,which can inspect 685000um end-face.) The enlarged picture is then sent to the display through a video signal. Consequently the status of fiber end-face is showed clearly.
AYT-02 features its unique configuration, because of which many places can be inspected conveniently. For example, it can test the patch cord directly. It can work with either male connector ends or inspect through female bulkhead adapters. As a result, many hard-to-reach connectors that are installed on the 'backside' of patch panels or inside hardware devices can be easily inspected. It eliminates the need to access the backside of patch panels or disassemble hardware devices, bringing more convenience to the inspection.
Meanwhile, it avoids the potential eyes hazard, which may be caused by laser signal sent out from fibers if you inspect them directly. Since the product test the fiber through a display, such problem is totally not existed.
Actually, AYT-02 can be applied to anther situations familiar with the testing circumstance. It is suitable for the archaeological study. Besides, some special electronic kits and deep-hole plug-in can also be detected and so on. This book only refers to the application of optical fiber.
Magnification of AYT-02
1.1 Magnification
AYT-02enlarges the picture through an optical system and output them by CCD camera. Owing to its complex configuration and small size, the amplification is stably decided by the multiple of objective lens and the dimension of CCD. The larger the display is, the more magnification it offers. Normally the size is 3.5inch or 5.6inch or 9inch or 14inch. The size of PC display is 15inch or 17inch. When observing the image, to obtain a clear picture, you can adjust the contrast and brightness based on the spot light.
1.2 Kinds of magnification as follows
Display Index | 3.5inch | 5.6inch | 9inch | 15inch | 17inch |
Diameter | 2.5 | 4.5 | 8.1 | 12.3 | 14.5 |
Magnification | 200 | 360 | 600 | 980 | 1280 |
Note: 1) The data of diameters above are measured directly.
2) The magnification is calculated based on the fiber of 125um
1.3 Enlarged Area
As for the fiber ferrule, the detected size can reach up to 0.35mm diameter, which contains, not only the end-face of 125um fiber in the middle, but also the ceramic surface around. Adjusting the handle slightly will also help you obtain more enlarged ceramic area.
2. Probe Introduction
Body Part
2.1 Constitution
A Handle: the handle houses many things, like CCD camera, optical structure, optical routine system, coaxial lamp-house, focus control structure and video output, power supply system and so on. The output is PAL.
B The Inner Structure of Handle is so compact and complex that, if long time work it will cause a fever. This isn't the mechanical failure but normal phenomena. If disassemble handle personally, it may cause damage. Meanwhile, you will lose the chance to troubleshoot freely.
2.2 Microscope Lens
A On the front of the handle locates AYT-02 optical system and the front end comes a lens-bar.
B The Barrel Assembly, mounted on the front body, houses lens-bar inside and used to match different tips. Turing the focusing wheel will change lens-bar meanwhile.
2.3 Barrel Assembly
Barrel Assembly plays a vital role in joining or fixing various tips.
2.4 Tip
To inspect different fibers, kinds of tips are needed. When using the tip, make sure the connection between barrel assembly and tip is firm enough.
Pictures of tips are as follows:
Standard one: Female tip
Another tips to select optional (like FC-APC-F,SC-APC-F as follows)
SC-APC-F (Optional) FC-APC-F (Optional)
Note: Because of the limited space, tips are not listed fully. Please contact us for further information.
2.5 Tips introduction
Tips | Introduction |
FC SC/F | insert to the FC/SC flange to inspect female fiber ends (dual use) |
LC / F | insert to the LC/MU flange to inspect female fiber ends, no need to remove the fibers around when the connector port is of high-density (dual use) |
2.5PC/M | Insert directly to inspect male fiber ferrules (normally SC,PC,ST three types) |
1.25 PC/M | Insert directly to inspect male fiber ferrules (normally LC,MU, two types) |
FC-APC-F | Insert to the FC flange to inspect APC female fiber ends |
SC-APC-F | insert to the SC flange to inspect APC female fiber ends |
| |
2.6 Attention Points
As pictures shown above, please pay attention to the following when using different tips:
1) When using the tip, do not rotate it once insert. Screwing the retaining nut on the barrel assembly works.
2) When removing the tip or barrel assembly, make sure the removing direction is along the beeline rather than laterally.
3. Monitor Introduction
1)Portable product.
Portable product is able to use in any place and any time,it's easy to hold and do not need complicated equipment that hinders the inspecting and repairing.
2)Monitor
3.5" high image resolution monitor enable to show clear image that fits any place to use.
3)Long work time
Equips with Lithium battery of high capability, each 2 hours recharger durables 4.5~5 work hours
4)Humanized design of appearance
Hand-hold design for professionals. Easy operation without taking off gloves speeds your works. Clasp ring at bottom fits to all chains and use in all environments.
5)Support 12v max 400mAh DC power for camera
It's convenient for user to check camera condition and correct direction of camera, so to make installation and repairing easier.
Specification
Display | 3.5" TFT color LCD |
Image Resolution | 640 x 480 |
Video in | Video in x 1 |
Power out | DC power out x1 (Support CCD camera of power source/Max electric currency 400mAh) |
System Format | NTSC/PAL |
Status Indicator | 2 LED(Power IND=green/Charging IND=Red) |
Power Source | Built-in rechargeable Lithium battery: 3.7V 2000mA |
Power Source | External power: DC 5V 1.0A adapter |
Dimension/Weight | 180mm(L) x 98mm(W) x 30mm(H)/250g |
4. AYT-02 Allocation
NO. | Name | Quantity |
1 | AYT-02probe | 1 pcs |
2 | 3.5 Inch Display | 1 pcs |
3 | LC/ F ,SC FC/F, | 2pcs |
4 | 2.5mm PC Male Tip | 1 pcs |
5 | 1.25mm PC Male Tip | 1 pcs |
6 | Charger | 1 pcs |
7 | Bag | 1 pcs |
Address:
Rm# 206, No. 135 Bldg, Liantang No. 1 Industrial Zone, No. 36, Guowei Rd, Liantang, Luohu, 518004, Shenzhen, Guangdong, China
Business Type:
Trading Company
Business Range:
Electrical & Electronics, Health & Medicine, Instruments & Meters, Tools & Hardware
Company Introduction:
Your demand, our commitment
As a subsidiary of Walcom Int′l Industry Ltd., Shenzhen Handsome Technology Co., Ltd. is a leading Chinese one-stop supplier of portable meters & Instruments since 2006. With a research and sales team consisting of senior engineers and experienced sales & Service staff, we could timely develop and supply various portable meters & Instruments based on customer′s demand.
Currently we are dealing with 9 categories of products including analysis instrument, environment instrument, optical instrument, medical devices and jewelry tools, etc. Our main products are moisture meters, pH meters, thermometers, magnifiers, microscopes, hearing aids and diamond testers, etc.
We are worth your trust.
The ancient Chinese sage Confucius ever emphasized " trustworthiness " by saying "A country will collapse if its people have no trust in it. We must behave honestly and reliably". Today everyone of us faithfully follows this maxim by giving primacy to honesty in daily life, customer demand in research, product quality in production, and after-sale service during brand building. With the core value of "honesty & Credibility", we have served more than 1000 global customers since 2006.
We create value for you.
Win-win cooperation is our first business philosophy. We are always committed to creating value for our customers by delivering competitively priced products of good quality, service of safeshipping and fast delivery, and by cutting cost and saving time. Up to now, our products have been sold to countries from Asia, Europe, Africa, North America, South America and Oceania and have been well accepted by customers from more than 80 countries.
No matter when and where you need our service, we are always here to try our best to satisfy your demand.